| Showroom > special calipers |
|
|
CENTER DISTANCE VERNIER CALIPERS WITH AWL ANVILS |
 |
|
|
|
 |
-Center distance between two holes or distance between one hole center to one edge of workpiece can be easily obtained by moving slider.
-With up-and-down movement on left side jaw, a center distance between step holes can be easily obtained.
-Can be used to measure the diameter of a big hole.
-Can measure dimention between two step section of workpiece.
-Upon specially request by customer when placing order, the anvil tips of calipers may supply with YG15 carbide tips. The hardness of carbide is over than HRC68 for easy scratching on workpiece.
|
|
| Range(mm) |
Resolution((mm/in)) |
H (mm) |
H1 (mm) |
D (mm) |
L (mm) |
Accuracy(mm) |
| 20-150 |
0.02 |
180 |
50 |
16 |
20 |
¡À0.06 |
| 20-200 |
0.02 |
180 |
50 |
16 |
20 |
¡À0.06 |
| 20-300 |
0.02 |
180 |
50 |
17 |
20 |
¡À0.09 |
| 20-500 |
0.02 |
216.5 |
61.5 |
25 |
20 |
¡À0.09 |
|
| |
|
