Showroom > general calipers |
|

MONO-BLOCK VERNIER CALIPERS (Type II) |
 |
|
|
 |
-Calipers are made with Mono-Block Vernier to promising measuring accuracy consistency during lifetime of caliper.
-Calipers have outside and inside measurement functions.
-Outside measuring faces of calipers are all proceeded with hand-lapping after precision grinding in order to promise its parrelelism and roughness requirements.
-All other measuring faces except of outside measuring faces are proceeded with precision grinding in order to promise its parrelelism and roughness requirements.
-All calipers whose sizes are equal or bigger than 300mm have fine-adjustment device.
-All calipers are made of Stainless Steel.
-All calipers are strictly made according to Chinese National Standard GB21389-2008.
|
 |
Range(mm) |
Grad(mm) |
A(mm) |
B(mm) |
C(mm) |
Accuracy£¨mm) |
0-500 |
0.05 |
38.5 |
100 |
25 |
¡À0.07 |
0-600 |
0.05 |
38.5 |
100 |
25 |
¡À0.08 |
0-500 |
0.02 |
38.5 |
100 |
25 |
¡À0.05 |
0-600 |
0.02 |
38.5 |
100 |
25 |
0-500 |
0.05/1/128¡± |
38.5 |
100 |
25 |
¡À0.07 |
0-600 |
0.05/1/128¡± |
38.5 |
100 |
25 |
¡À0.08 |
0-500 |
0.02/0.001¡± |
38.5 |
100 |
25 |
¡À0.05 |
0-600 |
0.02/0.001¡± |
38.5 |
100 |
25 |
|
|
|